How to Charge My Psp Without a Charger

Frequently often used users gaming consoles face a problem when PSP is not charging.Naturally, it is impossible to continue its operation. What to do? We do not advise to spend time in attempts to charge it, more of that, it can be quite afraid to end. Best how quickly ask for help in our service centerwhere you will definitely help. Our masters first will determine why not charging accumulator battery PSP.To do this, we will conduct free diagnostics.

So, why not charging PSPs?

As a rule, in 95% of cases, the whole thing is as follows:

1. The most common cause - the charging itself came out. Try using the other in which you are sure that it is operational by 100%. If it helped, then just buy a new charging.

2. If USB PSP does not workperhaps, the connector itself came out. Faced with such a need often. In this case, only the complete replacement of the connector will help.

3. It is possible that the connector can be partially pulled. As a rule, it is checked simple way. Just twitch the plug in different directions, from this charging will appear and disappear. This problem is solved with the connector by simple restoration of the feet of the board at the plot of the connector.

How to charge a mobile phone without charger. How to charge a mobile phone without a charger? Many have to deal with the situation when charging at the mobile battery is over, and the battery cannot be charged. At the moment, it is not hunting to visit the store for the charger, and you need to call

Video reviews and comparisons of gadgets

Home »How to charge a PSP battery without charger

How to charge a mobile phone without a charger.

How to charge a mobile phone without charging Devices? Many have to face the situation when charging at the mobile battery is over, and charge battery It fails. For) Myth moment is not hunted to visit the store for the charger, and you need to call urgently. It will not be difficult to be on the train or be in the workplace, and the colleagues did not have any such model in the image of you. In general, the charger is a very fragile thing, it is at least a moment to get under his feet. Or your charger broke, falling from the height. It happens like this: the deepest night is for you you need to call on a very fundamental case, on which the upcoming your fate depends. There is an option to wait for a comfortable option, to purchase a new, alas need to be charged without a charger, as there are several methods to do this.

The 1st phone charging method without a charger is charging using a computer. To do this, it is necessary that the houses were a desktop, a laptop or a tablet with a USB-connector, and, of course, you need to have a suitable adapter on the connector of your charging Devices on USB. On the this moment Many manufacturers have connections connected to references mini and macro-USB, because users have several similar cables. You need another PC if it is not, you can ask for a neighbor - and the case will be manufactured. And at the moment the 2nd method of charging a mobile phone without a charging device, on this method you need to work out to work with the execution of several alternate actions. 1st step of the second charging method. This is the technical method of charging a mobile phone. It is necessary to take at least some charge has long been a lost or broken phone. At home, each of them several pieces lie without need. 2nd step. You need to cut off this charger connector for connecting the phone. Then, with the help of a sharp knife, you need to make a radial incision and remove the insulation with such a macar, so that there are two naked wires of blue and reddish color. 3rd step. The subsequent step will be connected to the battery of the wires and their fixation. Next you have to remove the battery from your mobile phone and look closely to see the contacts of golden color with the labels "" plus and "-" minus nearby. It is necessary to lean to a plus contact - the wiring of the blue color of the battery plus the contact of your charger, and is minus the contact of the reddish color wiring to minus battery. Tightly pressing the wires to the contacts, you need to fix the insulating ribbon or scotch. With the right acts, the battery begins to charge after connecting the charger to the network. It is impossible to touch naked wires to avoid the impact of the electron current, albeit non-mounted.

Charging the PSP without your native power supply.

Read also

Asking for the preparation of the iPhone to sell or eliminate problems there are problems associated with incorrect work Programs, users need to reset the device to industrial options. Now they will be considered how this problem is produced.




How to install an operating system on laptop Lenovo lenovo laptops Sold with the free DOS123 pre-installed free operating system, which, to put it mildly :), not suitable at work. Probably owners of Lenovo laptops (not only Lish ...




Google's efforts in the Internet services have witnessed one of the first gigabit velocities provided by Google Fiber. Now WebPass. Another Internet service provider. Renamed to "Google Fiber WebPass". If you did not know about WebPass, you are about ...




Compliance with battery operation mode, and for example charging mode, guarantees them trouble-free job During the service life. Charging batteries are created by a current, the value of which is determined by formless I. The average charging current, A., and Q. Pass ...




How to roll back iOS 7 iPhone 4. Multiple methods of kickback. So for the iPhone 4 with iOS 7 on iOS 7: two methods iOS system 7 on the iPhone can satisfy except a user who is not demanding to his gadget. Works System Medle ...




Usually, in our world, the tablets own the ability to install information as an ordinary password-code and its graphic fellow. Graphic key is one of the methods of blocking the device on operating system "Android & quot ...

Fast reliable way charge PSP, without native charger.

How to make charging for PSP.

Group in VK.

Method 3rd can be called your finger, how to charge the phone without a charger. You are going to the campaign or a business trip. You have repeatedly come across a failure of charging the battery of your phone during multi-day trips, therefore will have to be prepared in a suitable way. You can take a spare battery for you to charge Phone in hiking criteria. You can use another third phone charging method. You have the opportunity and time to prepare, you can use a homemade device for charging the phone, which is based on ordinary finger batteries. To create a self-made device, you need a similar box in the store of radio components or electronics and solder the appropriate connector to it, although you can do from the spare parts yourself. This method of charging a mobile battery without a charger is suitable only to those who have a mini-USB connector or there is a respective adapter.

One comment to write "how to charge a mobile phone without charger "

Somehow I had to heat the battery at the fire. Honestly, not the most perfect option. With those take with me an outdoor charger on solar battery Sititek Sun-Battery SC-09. Hopeless situations in nature have dubbed.

Read also

By: Mobile Indian Network, Calcutta Last update: February 12, 2020, 11: 36Lext newsXiaomi will present new headphones with HD Audio February 2510 basic functions Samsung Galaxy Z Flip: Is it worth buying (or not)! Reliance Jio is a ...




iPhone and other apple-ispended, this problem: iOS 9.3.5.1 worth it, I can't update and download applications in the AppStore. In this publication, we will conversate how to update iOS to the 8th version on the 4th iPhone and whether it is worth it. Hi, I update ...




Hard Reset, it is hard reset, made 2 basic methods. Regardless of the Favorite Method, it is overpowering about the reserve copying of personal information, today you will get a memory card from the tablet just in case a SIM card, if anyone are available. If the table is ...

How to put a photo for contact in Android - close people are always near the ability of an open accounting complex android programs The user can customize its own phone phone, which is called "for itself." For example, put your melody on ...

Add Comment Cancel reply.

The hottest topics.

Pour at night. The defects sleep very affects the quality of decision-making.

Abstracts

How to charge a PSP without charging? How to charge PSPs without changing PSP without help charge battery from. How to charge PSP via USB? How to charge PSP3008 Communication Mobile devices You can charge the PSP from how to charge the battery without a charger or how not all motorists know how to determine what causes the car failure to start. as charge PSP without charging devices how to charge PSP without how to charge 14,4 V battery without having a charger how to charge a battery without a charger how to charge the battery without charger. Very often Mobile owners How to charge PSP SLIM from USB if I am completely How I charge PSP from a USB if I am a battery, from Nokia without parsing everything is charged how to charge the battery. Posted by Kuzma Ptkov. How to charge a PSP without a charger? How to charge PSP without had no charger Help Create battery charging battery without PSP. PSPX forum 10/3 charging battery without PSP I need charge battery Not practice. As charging for PSP (zyzy) with your own hands 1 part.

POST Views: 16

The main advantage of a portable gaming console is the ability to play anywhere. This is ensured by the battery or rechargeable battery. The last type of food is implemented in the PSP console, and then we will tell about the intricacies and features of charging this device.

Sony's first portable console battery options There are many. They can be divided into two large groups - regular and freelance. The first refers to the use of a complete charger (for a house or automotive network) and a USB connection to a computer. To the second - the use of a third-party power supply and charging the battery separately from the console.

Method 1: Complete Charger

The optimal method of replenishing energy in the PSP battery is the use of a standard power supply.

Method 2: USB charging

For cases when the charger is lost or there is no access for other reasons, Sony engineers have provided alternative optionwhich is to get energy from the computer's USB port or laptop.

Attention! Use charging for phones and tablets is not recommended, since there is a risk to output the battery or reduce its capacity!

Method 3: Side Charger

If Options standard charging or USB connection is not available, you can use the third-party charger - there are universal power supplies with a multitude of common connector (nozzles) and switching modes of the transformer on the market.

PSP parameters are as follows:

• Voltage - 5V;
• Input voltages and frequency - 100-240V and 50 / 60HZ, respectively;
• Power - 2A (series 1000 and 2000) and 1,5A (3000, GO and STREET series).

However, even in the case of setting correct parameters stable work from third-party source Nutrition is not guaranteed, so we advise this method only as a last resort.

Method 4: Universal BP for Batteries

The hardest situation is when the console is broken by a regular power connector and the battery is completely discharged. In this case, you can try to recharge the battery through a universal charger "frog".

Attention! All the actions below are you at your own risk!

What to do if PSP is not charging

Sometimes even when complying with all rules and recommendations, the PSP charging does not occur. We will analyze the most common causes and methods of eliminating the problem.

1. If the console is not charged when you connect via USB, repeat steps 1-3 of the method 2. Once again we remind you that with the full discharge of the battery it can be charged only through the plug or separately from the console.
2. It is also worth checking the charger, especially if it is not original - perhaps the set parameters are not suitable, why the battery goes into overload protection and is not charging. The original BP can be checked on another PSP or other device with a suitable connector. If trouble detected, replace charging.
3. It is not excluded that the battery is to blame. Usually its failure is accompanied by other symptoms, such as:
   • Suspiciously fast charge up to 100%;
   • Short (less than 30 minutes) term autonomous work consoles;
   • Racing charge indicators (for example, at first 40%, then 50%, then 40% again).

   If you have come across one or more phenomena from the list above, most likely the battery of your PSP has failed and it is required to replace it.

4. If the power source, and the battery is obviously good, the problem lies in the "hardware" of the console itself. Usually the repair of such problems at home is impossible, so you have to contact the service center.

Conclusion

Now you know how the PSP can be charged and what to do if the prefix does not charge. Finally, once again we will remind - use only original accessoriesBecause they are most compatible with the console.

The main advantage of any portable gaming console is the ability to play anywhere, without being tied to the network, TV or sofa. This is different and the most popular pocket console from Sony.

However, they still have disadvantages. In particular, this is the need to periodically charge the battery. Of course, the same PlayStation Portable standard settings Brightness can provide up to 6-7 hours of autonomous operation. But it will still need to charge. And how can this be done?

Available Charging for PSP

Fortunately, the issue of replenishing the energy of the battery in this system is thought out comprehensively. And this means that you can restore the charge different ways. First of all, use the standard charger that comes in the kit. It connects to the 220 V network, is connected to a separate socket on the console and allows for several hours to completely power the battery. At the same time, at this moment you can play freely, which is very convenient. But note that it is best to use only original components to eliminate battery damage. And where to buy charging for psp? Accessories you will find in specialized online stores.

Of course, it is not all options. If there is no charger or free socket at hand, you can save a computer or laptop. PSP portable console is equipped with a mini USB port through which you can connect to another device. And if the USB port of a PC or laptop can provide a sufficient charge, then the console will be charged. To do this, do the following:

• insert the cable into the console and in the PC;
• select the USB charging function in the console menu.

High-quality wire should also be used here.

For car owners in specialized stores gaming consoles It may be available for charging for Sony PSP from the cigarette lighter. Just insert the device, connect the cable, and the system begins to charge. Convenient and takes a minimum of space.

If you are on the way, and at hand there is no charging, nor cigarette lighter, no laptop, then save the position can external source Nutrition. For example, PowerBank. But it is important that the device can provide a sufficient level of current. Otherwise, PSP simply will not be able to get a charge and, of course, recharge.

Hello, readers Muski. Today I will tell you about 5 volt charge for PSP (hereinafter referred to as I - BP) or about where I applied 30 points obtained by stock.
Who is interested - I ask for Cat.

Lyrical digression

I'm buying through the Internet from 2011 and mostly from brothers from Podnebyss. Accordingly, I also read this wonderful site for a long time and regularly. Periodically attended the idea of \u200b\u200bthe review to write to some other purchase from China, but Leng took the top of good urges. And the celebration of my inner writer suddenly happened over laziness. Although I have a little loaf, I contributed to this "accomplishment" inspired by the authors in the face and with their radio amateur radio reviews, the potential to earn a "buns" from the site, and, of course, an increase in free time at the expense of additional weekends at work (citizens "Zamli Pad White Wirfi" will understand). On this it would be necessary to finish with deviations (there would be no one at all, but this is my writer debut on this site, so I decided to introduce you to a little with my "purchasing" part of the person).

I will not give a photo packaging of the goods and the process of his unpacking, I do not think that someone is interesting. I will only clarify that the parcel was sent to China Post without a track number and arrived in a record deadline for me - 16 days (usually delivery takes from 25 days). The order was made on 27.02, a letter to confirm the sending of goods came 28.02. Sending for 1 day a good result - for this store plus. Oh, yes, in the CN22 customs declaration, it was stated that in the parcel of Gamepad and, returning home from the post office, I went through the options in my head as it happened, because I did not order gamepads. Well, for the intrigue shop another plus! 
Product description from the store says about technical characteristicsoh; On compatibility of BP with various models PSP; about high quality; On the built-in protection providing a secure charging; About a stable output and fast charging, etc. In general, see ourselves:

A vigilant buyer, of course, will immediately notice 2 types of stickers on the photos of BP provided on the store page, I have with such a sticker:

Unpacked the parcel - stuck the BP into the network and signed the output voltage - 5.36V, it seems that it works. We believe the sellers for the word, especially when it comes to narrow-eyed brothers. In this case, by the weight of the BP, I doubted its capabilities even more (unfortunately there are no weights in my disposal, but in the customs declaration there is a weight of 95 grams, this is the weight of the entire parcel with packaging and cables). Experience suggested that there can be no network double-powered BP so lightly. The overall dimensions of the boxes are as follows: 76x46x23mm.
Length network cable excluding the length of the plugs - 99 cm, the resistance of each wire measured from the plug to the plug was more than 0.3 ohms, however, for such a sophisticated BP (5V * 2A / 0.6 \u003d 16.7W, I accept the efficiency of 60% in the stated nominal load mode) it does not matter, but Here for the output cable these characteristics are critical. Its length (from the plug to the track paths) - 112 cm, the resistance of each wire is 0.15 ohms, which in the amount gives 0.3 Ohm or, with the stated current in 2 amps, the voltage drop of 0.6 volts (moreover, at 2a, the cord will be warmer - The diameter of copper wires is less than 0.4mm). To charge PSP, voltage drawdown by 0.6V is most likely not reflected, but on the other hand, 0.6 volts from 5 volts is 12%. In standardization and certification, I am not strong, but 12% for BP with "High Quality Assurance" is unacceptable :). Well, it was theoretically involved on the wires, it's time to go to filling, practical measurements and verification of the compliance of real technical characteristics declared.
Without finding fastening screws of the BP housing and making a couple of revolutions by the mediator on the joint of two halves of the case, came to the conclusion that the body was attached due to glue (saved). Therefore, the mediator was replaced by a plumbing knife, under the influence of which the plastic halves of hurts opened (it costs to note that the knife snorked a couple of times and therefore the BP acquired a fighting scars). Here he is the hero of the review "naked":

The first thought, who visited me, seeing the "loss" of BP - Miracles does not happen, to infuse to me the freest two amps. The size of the transformer (or rather the throttle, because this is a reverse transducer) minimum (core - E 13/7/4, which is used in all cheap charging for mobile phones, More than 4W from it is unlikely to be removed). From the material of the board, too, had a cheap -ette - Getinax. There are no some details. Moving the fee:

The quality of the soldering is normal, the traces of the flux are seen only in the legs of the network connector, the silk screen of both sides read well. Principal electrical circuit real device as follows:

Before us is a typical connector voltage converter, made in the form of a block generator.

We try to be clever or parts and the principle of the scheme

At the entrance of any filter from emissions to the network from this BP there is no (I got something). To straighten the network voltage used diode bridge (Although they did not save here) performed on four diodes VD1-VD4 type 1N4007. Condenser C1 with a capacity of 4.7MKF and an operating voltage up to 450V (wow, even in better power supply, it is categorized with 400 in the input filter capacitors) serves to filter 100 Hz pulsation and provides the required level constant voltage 310B (Typically, the value of its capacity is taken equal to no less power of BP, i.e. 1MKF \u003d 1W) for the converter. The R1 resistor is designed to limit the C1 charging current when the BP is turned on into the network (a thermistor is used as R1 in more expensive BP).
The R2 resistor creates the displacement of the transistor Q1 necessary for the initial start of the BP. Generation is supported by the C3 condenser included in the positive feedback circuit on the winding II, the generation frequency depends on its capacity and T1 parameters. When unscruiting Q1, the voltage on the lower scheme of the outputs of the windings I and II is negative, on the upper - positive, positive half-wave through the C3 condenser further opens Q1, the amplitude of the voltage in the windings increases - Q1 is avalanche-like opens. As the capacitor C3 is charged, the base current begins to decrease, Q1 begins to close, the voltage on the top according to the diagram output of the winding II begins to decrease, the base current is even more decreasing through the C3 capacitor, and Q1 is avalanche-like closed. The R6 resistor is required to limit the base current Q1. After the closure of the Q1 amplitude of self-induccous emfs through the VD7 diode (as a diode of Schottky type 1N5819 is used with direct current 1a, so that even if you close your eyes to a small dimensional power T1, then the current 2a will not give this diode) Capacitor C5 (cheap electrolytic A condenser with a permissible voltage of 10V and a capacity of 470μCF) and the voltage of the supply of BP is received. Resistor R4 - T1 primary winding current sensor. When the value of the current flowing through the transistor Q1 becomes large, the voltage drop on the R4 resistor increases and the Q2 opens via the R5 resistor, which will limit the base current of the transistor Q1 and, accordingly, the primary winding current T1. In the same way both negative feedback By voltage providing the stabilization of the output voltage - when the voltage is exceeded (stabilization stabilization voltage plus a voltage drop on the LED of the Ottrian plus a voltage drop on R8) through the U1 stabilion, which stands at the output of the BP, flows the current and LED optocoupler IC1 will start glowing, its phototransistor will get a positive voltage The C4 capacitor affects Q2. The R8 resistor limits the stabilion current, and R7 protects the optro LED from damage to its high current. Components R3, C2, VD5 form a damper, which extinguishes the emission created by the primary winding T1 when closing Q1, thereby protecting the last from the breakdown. CY1 is a special interference capacitor (I suppose that this is an ordinary capacitor with a breakdown voltage 800 or more volt). Faceless capacitors measured by the LC meter of the capacity of which are 1NF are used as C2 and CY1.

And now measurements.
As already mentioned earlier - at idle the TWP gives out the voltage of 5.36V, which by the word in 10 minutes never changed even to weave (but this does not mean that there is such good stabilization in the BP, rather that cheap multimeters With the auto trip ranges of measured values, they have large inertia, namely, I spent this dimension). Let's see the oscilloscope:

In the cell 1 kHz and 0.1 b. Pulsation amplitude is 0.25V. Long vertical lines These are short 50kHz pulses that are not visible to a faster scan of my oscilloscope. But under the load, it is possible to disappear these impulses increased many times:

Load current 0.46a, the magnitude of the output voltage was 5.13V. In a cell 50 kHz and 0.2V, i.e. Pulsation amplitude 0.6V. From the parts, only choke is heated (the temperature of the temperature was measured for the heating is insignificant). With a load current of 0.84a, the magnitude of the output voltage ranges in the range of 4.92-4.98V, the amplitude of the pulsations increased to 0.7 in this case, T1 is greatly heated - about 80 degrees (this is heating for the test for 2-3 minutes in the absence of the BP case). To load no longer because Schottky diode VD7 standing at the exit of BP can emit the magic smoke that is the basis of the work of the entire electronics. :)
For comparison, we bring the pulsation of the output voltage at idle the keeper itself (at the time of purchase) bought once a long time ago on the bike with the claimed output current of 0.5a:

In one cell 1 kHz and 0.2B, under load everything is much sadder than that of the observed BP. Really from the Bikov charging is more than 0.2a not to remove.
But the oscillograms of the pulsations of the output voltage of the original charging from the old Nokia with the claimed output current of 0.3a. Idling (focus on the photo is not due to the fact that it was filmed with weak natural light):

Looks very bad? On the contrary! These ripples with a frequency of 190kHz and an amplitude of 0.08mv (in the 200kc cell and 0.02V)!
Oscillogram under load 0.4A:

In a cell 200kc and 0.1V, i.e. These are pulsations with a frequency of 75 kHz and an amplitude of 0.3B when the declared nominal current is exceeded by 33%. Both charging are made on the same typical scheme. Such differences as the output voltage are due to the accuracy of the calculation and quality of the design of the throttle.
There are no measurements of switching currents and stresses due to the lack of instruments for registering them (such an analog oscilloscope is defecting such an analog oscilloscope).
Is it possible to improve the reproduced BP and if so, how? If you have in your disposal, in addition to the soldering iron, various details are also different, then yes. First, increase the capacitance of the output capacitor C5, it will reduce the pulsation of the output voltage (here the porridge does not work with two reservations. The first - with a significant amount of this capacity, its charging current when the BP is turned on, the VD7 diode is turned on. The second - large capacity capacitors cost money which in this design is inexpedient) and in parallel to it permanent condenser With a capacity of at least 0.1MKF, which "facilitates life" C5 and slightly reduce the high-frequency (50+ kHz) pulsation of the output voltage. Secondly, to secure pCB The TL431 chip instead of the stabilion with the required strapping, it should give greater output voltage stability. Thirdly, to increase the capacitance of the capacitor C1 to 10 MCF (above does not make sense and also requires the installation as a R1 thermistor or resistor with greater resistance), which will allow better loading primary winding T1 at high currents at the exit of BP, and therefore remove slightly more power. Fourth, replace the output cable. Fifth, replace the VD7 diode on a diode with a smaller voltage drop, which will also make it possible to remove a little longer power at the exit.
Oscillograms of output voltage with a double capacitance of the Output capacitor C5 (K5 was parallel with the condenser 470MKFH50B):

Idling, in the cell 1 kHz and 0.1V, the amplitude of the pulsations was only 0.06V, the output voltage is all the same 5.36V.

At a load current 0.46a, output voltage 5.13V. In a cell 50 kHz and 0.2V, the shape of pulsation pulses has become more smoothed - there are no sharp peaks and, accordingly, their amplitude has become much lower - less than 0.4V.
Capacity C5 Increased in your BP I did not - I just added a SMD capacitor with a capacity of 220NF. Also did not increase the capacity of the input capacitor C1, because I decided that with the BP to shoot more than 0.45a I do not need. But Zebabitron replaced the TL431 and the three-dimensional SMD Diode type SS36 (for and TL431 and SS36 I also have sufficient quantities, I have been ordered from China in packs of 100pcs as a diode VD7. For TL431, it was picked up the resistance of the R9 and R10 resistors to obtain exactly 5 volts at the output. As a result, with the same load resistors, I received the following:
Load current 0A (idle) - output voltage 5.01B - ripple 0.25V.
Current 0.45A - Output voltage 4.98V - Razzation 0.6V.
Current 0.84A - Output voltage 4.95V - Razzation 0.6V.
Current 1.14a - the output voltage ranges in the range of 3.96-4.00V - pulsations exceed 1B.
Current 1.38A (k.z. through the multimeter) - the output voltage is zero. Those. The choke cannot issue a current of more than 1.38a (although it can only give such a current shortly, because in this mode overheats). It is also obvious that the use of TL431 reduced the dependence of the output voltage drawdown from the load current.
By ordering this BP, I already assumed two options for its use depending on the real output current: if about 2a - the power of one of my self-pole, if less, it is used to power the recently acquired W3020 wifi-router (the current consumed by the router does not go beyond 0.45a). And once for the router, then the BP body was "visible" USB Type A. That's how it looks after my "Doping":

The schematic diagram began to look like this:

USB is fixed with glue for adhesive gun. TL431 "laid" is not accidental, so it is obtained as remote from T1, which is significantly heated, and TKS TL431, though good, but not perfect.
Now this BP is working in 24/7 mode under my sensitive control.
BP housing in the area of \u200b\u200bthe choke is warm.
Time to sum up. BP charge PSP can and will be, but it does not correspond to the stated characteristics. Protection against k.z. There is no no, because when k.z. VD7 diode breaks (and in general, correctly calculated reverse transducers are not afraid of K.Z. at the output). Real current, which can give a long-term power supply to a load of no more than 0.5a. Stable output I. fast charge? - Well, you understood. :)
The conclusion is obvious - to buy this product for 1.55 + delivery does not recommend anyone.
Technical documentation for some components used in the described BP:

P.S.: For measurements, I used:
ruler student Soviet production; Multimeter ADM02 Chinese production; LC-meter 4070L Chinese production; Oscilloscope C1-65 Soviet production; measuring the resistance of the wires was made in an indirect method using a self-made current and multimeter source; As a load used powerful permanent resistors by 11, 5.8 and 3.3 ohms. The above measuring instruments have no special accuracy calibrations, but for these measurements of the accuracy of their testimony is sufficient. :)
P.p.s.: All of the above is the fruit of my judgments and therefore does not pretend to be complete, neither for truth. I'm sorry if the process of familiarizing the reader with this text was accompanied by any negative sensations.
P.P.P.S: I will be glad to constructive criticism and is ready as you have the opportunity to answer questions about the questions on the topic of the goods overlooking.
I plan to buy +10. Add to favourites I liked the review +52 +91

How to Charge My Psp Without a Charger

Source: https://newtravelers.ru/en/nastrojjka/chto-delat-esli-poteryal-zaryadku-ot-psp-kakaya-podhodit-zaryadka.html

Share this post